Important Basics And Tips On Choosing Travel Trailer Electrical Panels

Just like it is with owning an ordinary home or vehicle, a travel trailer requires special care and maintenance from the owner in order to serve them conveniently and to last long. One of the most important parts of the travel trailer is the electrical distribution system. It can be quite a daunting experience when you experience electrical faults in the middle of nowhere and you have no clue on where to start with the troubleshooting or fault detection process. Of course, RV electrical systems are made up of many different parts, most of which are equally essential to the travel trailer and the owner. However, however, Travel Trailer Electrical Panels are one of the most important parts the owner should have some basic understanding about. This way, you can be able to call for help in the case above with a clue on where the problem might be. Below are some things you should know about this part of the RV along with some crucial tips for buying Travel Trailer Electrical Panels

What Is An Electrical Panel?

An electrical panel is also commonly referred to as a breaker panel, breaker box, or service panel. It is an electrical unit that houses a number of circuit breakers for circuits that distribute power throughout your travel trailer.

RV Circuit Breakers Protect AC Systems

Apart from allowing the supply of circuits to the various parts of your travel trailer, an RV circuit breaker goes a long way in protecting your air conditioning system from damages and shorts. For instance, an 110-volt RV AC system will have a separate electrical panel from the 12-volt wiring, thereby minimizing the chances of confusion between the two when replacing or troubleshooting. Even though the 12-v circuit can also give you a substantial amount of shock if handled inappropriately, handling an 110-volt system the same way can be a deadly accident. This is why these systems are well protected by circuit breakers to minimize the chances of such accidents occurring.

Considerations When Buying a Replacement Electrical Panel for Your RV

1. Amperage

There are different types of electrical panels, often identified by the amperage amount they produce as well as the number of electrical circuits they hold. When replacing electrical panels for travel trailers, it is important that you match the amperage capacity provided by your current model. Most travel trailers use 20, 30, and 50-amp panels, even though amperage capacity can go up to as high as 200 amperes depending on the electrical capacity required. For instance, regular homes use 100 - 150 ampere electrical systems.

2. Voltage Rating

The other important thing to consider when buying electrical panels is the voltage rating, normally expressed in Volts. The ideal type of electrical panel required by your travel trailer is the one that matches the current one in terms of voltage. There are two main types of circuit breakers in terms of voltage. These are the single pole and double pole, with 120V and 240V ratings respectively. However, it is important to work with a professional before buying, so that they can advise you on whether you need to upgrade or replace the unit with a similar one.

3. Size and Construction Material

Especially since we are talking RVs and travel trailers here, size and construction material are also important factors to consider. Most models come enclosed in metal materials such as steel and cast iron. It is important to choose a unit that will adequately accommodate your travel trailer’s electrical systems without putting in too much weight that will lead to navigational problems.

4. Environment Recommendation

Due to heating and cooling aspects, the ideal place to install an electrical panel is sometimes advised. Most of them are either recommended for either indoor or outdoor installation. Sometimes you will see them indicated as flush mount or surface mount, in terms of the specific location of mounting.

5. Fused Electrical panels (12-Volt DC Systems)

One of the safest electrical panel options for travel trailers is the 12-Volt DC Systems. This is because, in addition to the fact that a short may cause a localized fire or burn, they are regarded highly safe and reliable. Additionally, most of the ones currently fitted in modern travel trailers come equipped with removable fuses to enhance safety and dependability.

Product Examples

1: Eaton 50 Amp/30 Amp/20 Amp 120/240 VAC Outdoor RV Panel
• Buy From: menards.com
• Price: $131.97
• Link: https://is.gd/e01zEE

2: 60-Amp RV Panel Outlet with 50-Amp Receptacle, Breakers and GFCI Duplex
• Buy From: Home Depot
• Price: $102.08 /each
• Link: https://is.gd/SkfM3V

3: PD5000 Series AC/DC Power Distribution Panel - 30 Amp, 120 VAC
• Buy From: rvpowerpartsplus.net
• Price: $74.95
• Link: https://is.gd/Oy0B1J

Stuart, Huntington Beach, Lawrenceville, Westland, Muscatine, California, Yazoo City, Edwardsville, Fort Worth, Streamwood, Newark, Salinas, Dana Point, Naperville, Geneva, Collingswood, Oakley, Pearl, Greenwood, Barberton, South Miami, Concord, Batavia, Paramus, Dubuque, Brentwood, Brookfield, Santa Cruz, Lebanon, Point Pleasant, Pasco, Fortuna, Lake Jackson, Lebanon, Rosemount, Grover Beach, Wisconsin, Rockford, Burnsville, White Plains, Concord, Columbus, Pasadena, Sheboygan, West St. Paul, Shelbyville, Virginia, Haines City, Maryland Heights, Palos Heights, Darien, Chesterton, West Des Moines, Watauga, Greenville, Bridgeport, Maryville, Largo, Kerrville, Hoover, San Mateo, Evergreen Park, Hibbing, Missouri, Wabash, Nebraska, Guam, Prairie Village, Cedar Park, Kansas, Watertown, Country Club Hills, Broomfield, Iowa, Rantoul, West Sacramento, Westminster, Colton, Carpentersville, Redmond, South Daytona, Butler, Painesville, Texas, Lakewood, Pittsburgh, Springdale, Illinois, West Carrollton City, Huntersville, Easton, Monroe