Important Tips On How To Improve The Efficiency Of Your Travel Trailer Brake Lights

Brake lights were first used on trailers to make them easy to identify on the roads at night. These lights now act as running lights as well as a signal to other drivers when the trailer or vehicle is stopping. They are without doubt an important safety item that drivers use to communicate their plans or intentions to other drivers on the road. It is important to mention that there are several types of travel trailer brake lights readily available in the market such as LED lights and the traditional battery and bulb powered units.

To get the best out of your brake lights, it is important to ensure that they are well maintained at all times so as to constantly give you bright lighting. First and foremost, you should ensure that the housing is in good condition. If you find that your housing is in poor condition, dirty or rusty, then you should take your time and have it repaired. If the damage is too much, then you should make arrangements to replace the unit. Make sure the bulb socket is also in good condition and confirm that the wiring from the socket is also in good condition. Keep in mind that these are electrical components and you thus need to ensure that there is significant contact between the metal surfaces so as to enable enough flow of electricity.

Secondly, you should ensure that the housing has been well grounded. Always ensure that there is a metal to metal contact between the metal body of the trailer and the housing. In the event that your trailer is made of another material such as wood or fiberglass, then ensure that you ground the wires on the housing to the frame of the trailers frame. This is very important because most common problems with flow of electricity that many trailer owners experience usually involve grounding.

If you find it necessary, you can also opt to paint the inside of the housing white, this is only recommended if the housing is poorly colored or discolored. If you are painting the housing, be careful not to paint your bulb socket. Clean off any paint or dirt before you apply a new coat of paint. It is worth mentioning that white is the recommended color and nothing else; be it mirrors, tin foil, gloss white, chrome or any other color is as efficient as the flat white color.

You should also take your time and clean the inside or the lens. If the lens has any embedded in dirt, then light will not be able to pass through effectively. If the lens cannot be cleaned or if it’s made of plastic and is heavily hazed, then you should ensure that it is replaced as well. When replacing your lens, always go for glass over plastic since they don’t brittle or get hazed as easily as plastic lenses. Finally, depending on the type of trailer lights you have fitted, you can opt to have a dual element bulb fitted. This usually implies that one element is for parking or driving while the other is for turn/brake signal light. Even though the standard bulb is the 1157 bulb, you can also opt for the 2357 and 2057 light bulbs. The 2357 brake/tail combination bulb produces 25% more brightness for the brake light. But it does have a less lifespan than the 2057 light. It does also produce less heat than the popular 1157 light bulb.

Here are some of the popular Travel Trailer brake lights readily available in the market. They include but are not limited to the following:

1) Product Name: Wesbar Trailer Light Kit Single with brake light function

Product Price: $ 25.10

Product URL: https://is.gd/CVa3g4

Product Details: these are heavy duty Ag lights and are also sold with a two way weather pack shroud. The unit is available in both single and dual units. It does have a very rugged external housing and lens design with a vibration dampening bulb holder. It is worth mentioning that the brake functions are usually wired with a SQ4 plug.

2) Product Name: Stop/ Turn Brake Light

Product Price: $ 15.18

Product URL: https://is.gd/Jx6SaS

Product Details: this oval stop/ turn tail light is red in color and has a recessed mounting. The lens is made of polycarbonate material and has a 12VDC power source.

3) Product Name: Leading Edge lighting Pair

Product Price: $ 14.26

Product URL: https://is.gd/1EPMKK

Product Details: the unit prides itself in having 2 bulb style with replaceable bulbs and lenses; the 1157 and 194 bulb. It does have quick connect sockets for fast and easy installation since no connectors are needed.

Blue Springs, Bryant, Enid, Azusa, Sacramento, Norton Shores, Oklahoma, The Colony, Tigard, Fredericksburg, Madison, Spokane, Vermont, Sayreville, Romulus, Suisun City, Searcy, Lyndon, Rancho Mirage, Naples, Athens-Clarke County unified government (balance), Laredo, Springfield, Nebraska, Atascadero, Artesia, Lincoln Park, Flower Mound, Montana, Hope Mills, Pleasant Grove, Williamsport, Saginaw, San Mateo, Visalia, Easton, Hercules, Alaska, Merced, Marshfield, Kennett, Elgin, Cudahy, Des Moines, Farmington, Indio, Columbia, Norman, Corsicana, Springfield, Covington, North Platte, Morgan Hill, Watertown, Berwick, Pleasant Prairie, Jamestown, McMinnville, Meridian, Rolling Meadows, Illinois, Virgin Islands, Ashwaubenon, Rockford, Corinth, Temple, South Jordan, South Dakota, Hamtramck, East Rockaway, Fairview Park, Auburndale, Franklin, Belleville, North Las Vegas, Middletown, Des Moines, Salem, Norwich, Jasper, New Brighton, South San Francisco, Washington, North Ridgeville, Clearwater, Madera, Hobbs, Merrill, Michigan, Casselberry, Westwood, Wheaton, West Chester, Liberal